The nature of the work required is to design, supply, erect, install, inspect, remove, manage H&S regs (but not limited to) of all Warehouse racking, install and certification requirements for Southern Water.
College of Policing seeks supplier(s) to attend site at Ryton on Dunsmore, CV8 3EN, to carry out a programme of works for the following packages ("Lots) in accordance with the documents associated with the applicable invitation to tender.
Tenderers may bid for any or all of...
Bydd Cyngor Bwrdeistref Sirol Caerffili yn rheoli'r broses gaffael ar ran Dysgu ar gyfer datblygu cynnig grab and Go, er mwyn galluogi cyflwyno modiwlau dysgu proffesiynol mewn ysgolion a lleoliadau addysgol gan addysgwyr – sy'n gweithredu'n lleol fel hwyluswyr ac sydd a...
Established in 2004, Procurement for Housing (PfH) is a national procurement consortium dedicated to the social housing sector and
supported by the National Housing Federation (NHF), Chartered Institute of Housing (CIH) and HouseMark. Collectively, our Members
manage more than...
Established in 2004, Procurement for Housing (PfH) is a national procurement consortium dedicated to the social housing sector and
supported by the National Housing Federation (NHF), Chartered Institute of Housing (CIH) and HouseMark. Collectively, our Members
manage more than...
The Council is seeking to appoint a suitably qualified and experienced Contractor to provide a responsive and flexible service for the supply, delivery and installation of carpeting and associated flooring materials within accommodation allocated to homeless households...
Buyer
Wychavon District Council
Location
Pershore
Deadline
Closes 9 Oct 2026
Value
£150k
Key dates and value
Status
Closed
Submission deadline
1 Jun 2026
Published
7 Apr 2026
Estimated value
£917k
Contract start
29 Jun 2026
Contract end
29 Nov 2027
Notice type
UK3
Buyer type
Utilities
Overview
A single lot consisting of the following items: Mechanical load frame for static, quasi static and cyclic mechanical loading. The load frame will have the mechanical infrastructure, control systems, and software capable of supporting numerous standard mechanical tests, specifically: tensile, compression, and low cycle fatigue. Optionally, the system may support testing for, ratchetting, creep, creep fatigue, crack growth in fatigue, and crack growth in creep. The load frame should include one or more load cells with a maximum capacity of 100 kN (unless justified otherwise), fixtures and gripping solutions for standard geometry specimens of the material families of interest at ultra-high temperatures: refractory metallic alloys, ceramics, and ceramic-matrix composites. The load string must be capable of operating up to the required temperature for at least one test, with the understanding that fixtures are consumable when operating at these temperatures. The load frame(s) should have appropriate test control systems (e.g. to control for strain on the sample at temperature) and sufficient working space to permit the insertion of vacuum and heating systems. A vacuum system compatible with mechanical testing at ultra-high temperature. There must be ports for test control, optical ports for the data-rich diagnostics and their calibration and additional ports to allow future flexibility in diagnostics. A gas introduction system to allow alternative atmosphere testing. A heating system to allow sample test temperatures up to at least 2,000 °C with a preference for an ability to test at temperatures of up to 2,500 °C for the material families of interest. The heating system must not limit the line of sight for the data-rich diagnostics. An appropriate cooling system to protect the load cell and fixtures, where required. Support with installation, commissioning, and training on the use of the above.
CPV codes
39715200 Heating equipment
31720000 Electromechanical equipment
34950000 Loadbearing equipment
About the buyer
UK Atomic Energy Authority has published 73 tender notices since 7 Oct 2023, with a combined advertised value of £15.4m. 5 of them are currently open.
How to apply
Tender documents and submissions are handled on the official portal (Find a Tender). Register there to download the documents and submit your response before the deadline.
Upload the tender documents and mytender.io drafts compliant answers from your own past bids, case studies and policies, so your team spends its time improving the bid rather than starting from a blank page.
Source: Find a Tender. Contains public sector information licensed under the Open Government Licence v3.0. Details may change; always check the original notice before bidding.
